Malaysia, Singapore and Indonesia Laborotary,Scientific and Hospital Equipments

MTI CORPORATION, USA

Desktop X-Ray Orientation Machine for Single Crystal Orientation Measurement

      Product Introduction

      Desktop X-Ray diffractometer used for analyzing the orientation of all single crystal types in
      two-theta angles from 10° - 140°. The built-in single wavelength filter ensures the
      emission of a monochromatic X-Ray wavelength (Ka) with +/- 15'' angle accuracy. Designed w
      15'' with precision and compactness in mind, on of a monochromatic X-Ray wavelength (Ka)
      with +/- angle accuracy. Designed with precision and compactness in mind, this desktop X-
      Ray machine provides the ideal solution for crystal research labs, substrate manufacturers,
      and wafer quality control facilities.

      Specifications :

      Features

Simple Operation: With an understanding of Bragg's law, an individual can learn the machine operation within minutes
Precision: Crystal orientation can be determined accurately within +/- 15" (0.0046°)
Safety: Low X-Ray emission, automatic shutter and lead foil cover reduce exposure to radiation
Cost Effective: Features comparable to more expensive X-Ray diffractometers

Power Supply / Power

Input AC 208 - 240V, 50Hz/ 60Hz, 250W (The power plug is NOT included)
For 110V, 500W Transformer is required for this diffractometer
The high voltage power supply is a discrete unit along with the diffractometer

Please click the picture

X-Ray Tube

Cu target, air cooling, Cu-Ka output
X-Ray tube with a monochromatic wave (Ka) filter improves accuracy
Scintillation detector reduces harmful X-Ray radiations

Max. Tube Current :5 mA at 35kV

X-Ray Detector : Max. Voltage at 1050V

Measure Range : 2 Theta: 10º ~ 140º, Theta : 10º ~ 70º

Accuracy

Digital display with measurement accurate within +/- 15" (0.0046º)

Sample Holder

      Fig. 1                              Fig. 2                                   Fig. 3                                     Fig. 4
   Substrate                                                                                                                 Large Wafer
Sample Holder        Mounting Substrate          Vaccum Suction Plate            Example with Pump

One spring load wafer holder is included for holding a flat wafer or substrate smaller than 2" (See Fig.1 Fig.2)

One ceramic vacuum suction plate is included for holding a flat wafer or substrate larger than 2" (See Fig.3 Fig.4)
A 6mm OD tube is required for the compression fitting on the back of the vacuum suction plate (See Fig.3)

Dimension of X-Ray Machine : 500 x 650 x 400 mm ( L x W x H )
Dimension of Power Supply Unit : 500 x 500 x 500 mm
Shipping Weight : 150Kg